Lumbar Back Supports

LumbAIR, PropAIR, Embrace AIRPlus Deluxe & Inline Seating


LumbAIR is a lumbar back support that encourages ideal posture and posture changes. Its small size makes it easy to carry in cars, airplanes, homes, or other places where sitting is required. Brian Carroll was first introduced to this product by Prof Stuart McGill in 2013, and over 11 years later continues to endorse and use all of the back supports listed below. Not all back supports are created equal – proper back support requires changing the degree of support depending on the unique curvature of an individual’s spine, injury history, and restrictions.

The LumbAIR is guaranteed for one year against defects in materials and workmanship. The valves are guaranteed for life and the foam is engineered to last 15 years.  It is also has exclusive fabric that is immune to bacteria, fungus and body odour.  The materials used in the LumbAIR are flame retardant, exceeding California standards.

Dimensions: 2 x 10.5 x 7 inches, Weight: 0.5 pound

Will the LumbAIR back support help you? – Take the test

Perform this test to see if the LumbAIR sitting support is for you: Sit in a chair with a firm seat bottom and back rest. Place your hands between your low back and the back of the chair. Adjust your hands to assess if pain is reduced and comfort has increased. If comfort is increased then the adjustable supports will help you.

“Even though I have been pain and symptom-free for over ten years when I sit, drive, or travel, I bring MY LumbAir with me anywhere I go; it comes with me as it makes sitting dynamic, plane, my truck, and so much more comfortable. I’ve witnessed the results of this back support change hundreds of lives and allow them to sit again after years of avoiding chairs and couches due to back, hip, and leg pain while sitting. The truth is; even the most luxurious cars and technologically advanced chairs fall short when it comes to dynamic lumbar support for back hurt individuals.”

– Brian Carroll


When sleeping, lying on the back causes the low back to flatten to the mattress causing spine flexion. Many people with back pain have flexion-triggered pain – making back sleeping painful. Pain while sleeping during the night will increase your sensitivity to more pain during the day. Eliminating pain while lying at night will help wind down your pain sensitivity the next day.

Recently, this same air bladder technology has been shown to reduce disc stress while sleeping. This resulted in the “PropAIR sleeper” which  can increase back comfort in bed.

Take the test

Place your hands palms down under your low back while lying. If comfort is increased, then the support provided by the PropAIR will enhance your sleeping comfort. Certain back conditions like stenosis and spondylolisthesis will not be helped with the PropAIR.

Others will find relief while lying on side by placing the PropAIR between the ribcage and hip to avoid painful side bending.

The hand activated air pump will tune in the optimal level of support for any mattress, or spine shape. The plush velour material against the person and the silk material interface with the bed sheets facilitates easy sliding and turning.

Embrace AirPlus Deluxe

EmbraceAIRPlus was designed with the help of Chiropractors and Physiotherapists and scientific proof. This patented design lets you determine the firmness of the support by incorporating an air bladder that is easily positioned with a vertical adjustment within the back frame. This optimizes the fit for each person. The inflatable bladder helps people to achieve relieving postures and changes in posture throughout the day to enhance back health. It creates changes in weight distribution and circulation patterns within the back. (see demo below) Important to you for the prevention of back pain and damage that may be caused by extended (over 20 minutes) sitting.

EmbraceAIRPlus can be used in your home, in your automobile or at your office.

The EmbraceAIRPlus is made with exclusive fabric that is immune to bacteria, fungus and body odour. It is guaranteed for one year against defects in materials and workmanship. The valves are guaranteed for life. The foam is engineered to last 15 years. These products are flame retardant, exceeding California standards.

Embrace Inline Seating Cushion

The EmbraceAIR Inline Seat Cushion has a molded natural wood frame and high quality ‘30-year’ foam. The In-Line Seating cradles the buttocks and evenly distributes body weight with contoured leg troughs and overflow edges to reduce weight on bony prominences. Ideal when your current seat is either too hard, too soft, or when you want to stabilize your back support height. Inline Seating can be attached to any of our ‘Embrace‘ type back supports with the included Velcro straps. Remember, fabric treated to make it immune to fungus bacteria and odor.

Contact Brian Carroll

Schedule A Consult Below

Take 25% OFF
Your first purchase
Subscribe Now!